Diesel Steel Bending Basics

Ready to get started? Great.


There are many benefits to bending steel.

First off, bending steel is extremely fun. Many athletes who take up bending literally become obsessed with it and bend multiple times a week.

Another benefit from bending steel is the physical result of bigger and stronger muscles. Straining against the steel requires a great deal of time under tension which results in increased strength and bigger muscles, especially in the upper and lower arms.


Next, bending increases your mental toughness. While the first couple of times you bend you may fail at a particular attempt, if you resolve to focus mentally and continue to hone your ability to do this, after a short time your mental toughness will enable you to blow past previous plateaus and climb the bending ladder.

Finally, there are certification systems out there that you can strive for and get recognition and your name 'up in lights' for the efforts you put into bending. Unfortunately, jumping right to the steel that you get certified on can leave you highly disappointed and possibly even injured.

This article serves as a guide of how to get started with bending and how to gradually climb the ladder safely and steadily.

TYPES OF STEEL TO BEND

There are a lot of options out there for you to start bending. Getting started can be as easy as heading to the hardware store. This is what you can pick up when you go there to get some beginner level nails to bend

Coiled Nails: Many nails are not straight the whole way down their shaft, but rather have a coiled design to them.

This coil makes the shaft of the nail thinner and less strength is required to bend them, a great option for people starting out with bending.
Ungraded Bolts & Screws: There are many different types of ungraded bolts and screws at hardware stores. Lag screws are one example, pictured here. Take a tape measure with you to the store and look for screws and bolts that are about 6 inches long 1/4 inch in diameter, more or less. These should be good selections for beginning benders.
One thing to take note with bending bolts and screws is that if they are threaded in the middle of the shaft, they will be easier to bend. Try to find un-threaded ones if you can for a more easily predictable bend, other wise you may want to go with a thicker diameter.

You Might Also Like...




NB : For a complete list of everything we use and recommend, swing by the reviews area. And of course the Straight to the Bar Store. It's all in there.

To learn how to put it to work, swing by the Guides area.


60D Nails: Hardware stores generally sell nails by the pound. Look for a grayish colored, multi-tier shelving unit where each tier spins around. This is where you will find the 60D nails.

As a little trivia, the D in 60D stands for denarius, a Roman coin similar to the penny, so 60D nails are also called 60 penny nails. This is a naming system that goes waaaay back in history.

60D nails are 6 inches long and the shaft is about 1/4 inch thick. You may find them with a coating on them or in their bright, or uncoated variation.


Graded Bolts: There are a whole host of graded bolts, also commonly referred to as cap screws. Their grade refers to their strength level.

The most common graded bolts I have found for bending are Grades 2, 5, and 8. The higher the grade, the tougher the bolt is to bend. The bolt heads shown above are for Grade 5 bolts. You can see that each bolt has 3 markings going around the head of the bolt. Grade 8 bolts have 6 markings going around the head.
Grade 5 bolts are usually silver in color, but they can also be found in green and black variations. Grade 8 bolts are usually a gold color.

Also, as the bolt grade increases, the more springy the bolt is, so it tries to fight you back during the bend. Get ready for a battle with these!

Rolled Steel: Rolled Steel can be picked up at many hardware stores. There are two main kinds of rolled steel ñ hot rolled and cold rolled.

Rolling is a metal forming process where steel is passed between a pair of rollers. Whether the steel is hot or cold rolled depends on if it rolled below its recrystalization temperature (cold rolling) or above its recrystalization temperature (hot rolling). Generally, cold rolled steel is tougher to bend than hot rolled steel of the same diameter. Cold rolled is also more consistent in strength and hot rolled varies more.

I have articles posted all over this site about steel bending and other grip strength feats. Also, if you are looking for even more information to get started bending and start climbing the bending ladder, get my Nail Bending eBook. It has everything you need to know for nail bending: a ramp-up schedule to avoid overuse injuries when starting out, a huge exercise index, and all the bending techniques you need to know how to bend like a monster.

Thanks and all the best in your training!

Jedd Johnson
DieselCrew.com
TheGripAuthority.com


Jedd 'Napalm' Johnson

Jedd 'Napalm' Johnson is a name synonymous with grip strength, and he has been training, sharing and competing with these skills for many, many years.

To acquire some serious grip strength yourself, head over to The Grip Authority and check out his superb ebooks and DVDs.

One of our favourites - Fixing Elbow Pain - takes a very thorough look at banishing elbow injuries completely. If you've ever experienced something like Tennis Elbow or Golfer's Elbow, you'll understand just how incredible that is. Fantastic.


Jedd blogs over at The Diesel Crew, and can also be found on Facebook, Twitter and Google+. Swing by.



Like this? Check out :

7 Years of Straight to the Bar : The Contest.Yes, I love the deadlift.Straight to the Bar will be turning an incredible 7 years old in a couple of weeks (Jan 17th - here's the first post). To everyone who's written, read and commented on the numerous articles, photographs and ideas - thank you all sincerely. It really is appreciated.
Blast from the Past : Kettlebells.

What kettlebells are, where to get them and how to put them to work.

Progressions for Unbraced Short Steel Bending.Love bending and looking for progressive, injury-free training? Adam explains the sequence.
Kettlebell Training for Grip Strength.Looking to add a kettlebell to your grip-training arsenal? Here's how.
Backyard Bastard Bash 2007.Again this year, John Beatty out-did himself with the 2007 Backyard Bastard Bash Grip contest. John is the owner of Fat Bastard Barbell Company, and puts the contest on every year. John’s facility is awesome for a Grip contest. Here's...


Of course, if you enjoyed these, I'd highly recommend grabbing the Strength & Fitness Newsletter. Delivered weekly, and absolutely free.

(there's also a Daily Update, if you're looking for an even larger dose of training-related goodness.)

NB : If you'd like to write a guest post for Straight to the Bar - I love hearing how other people are training - get in touch. If you've got a fitness competition or seminar coming up, add it to the calendar.

Look forward to hearing from you.


Over to you. Leave a comment below, or send us a tweet :


blog comments powered by Disqus
Straight to the Bar Strength Kit

Are You as Strong as You Could Be?

Grab the Straight to the Bar Strength Kit.

Training Guides, eBooks and of course the Strength & Fitness Newsletter. Absolutely free.